Keller Williams Realty Professionals

How to Install or Replace Insulation

by The Troy Team 04/05/2020

Image by mnplatypus from Pixabay

Proper insulation not only helps you save on your energy bills. It reduces your energy impact on the environment and may create a great selling point for your home when the time comes. But knowing were to insulate an existing home can be a project. Here's what you need to know.

How to Do an Insulation Assessment

First, you'll need to turn off the power at the breaker box. Have your flashlights ready. 

Remove outlet covers around your home and look inside to see if you have insulation. You might not have to check every outlet, but do check them on multiple floors and one on each wall to understand how well walls are insulated. 

If you have a wall that gets hot in the summer or cold in the winter, you may want to dig deeper. Pull a little out to see what kind it is and how thick it is.

Next, check your attic, basement and crawlspaces. This insulation you can more easily see. Use a yardstick to measure its depth and look for areas that are thinner than others.

Additionally, you may consider insulating:

  • Around storm windows
  • On band joints
  • Around pipes that might freeze
  • Between the studs on a finished attic floor
  • What You'll Need to Install Installation

    There are many insulation projects you can DIY. For example, re-caulking leaky windows and sealing drafty doors can help tremendously. But you can also add insulation in the attic and basement with either loose-fill or blanket insulation. Here's what you need.

  • LED lamp clip-on. You need your hands, so flashlights won't cut it.
  • Insulation of choice
  • 1-2 3/4" plywood panels to stand on if there's no floor
  • Goggles and a mouth/nose mask to protect your eyes and lungs
  • Long sleeves and gloves to reduce residue settling on your skin. Some materials cause terrible itching and bleeding if scratched.
  • Staple gun (for rolls) or insulation blower (for loose)
  • Prep the Area

    Take this opportunity to look for leaks. If you see signs of active water damage, you need to repair it before laying insulation. Now, place your plywood so you have somewhere to stand safely.

    Lay Insulation

    Lay insulation in areas where it's lacking. You can staple it to roof beams and beams on the floor. Just cut it to size if needed. 

    Keep in mind that when you open a pack of roll insulation, it expands. So please don't open it until you have it in the general area where you want it.

    *Pro tip* To cut blanket insulation more easily to fit, lay a two-by-four over the place where you want to cut it. This temporarily compresses it there so that you have a thickness that's easier to cut through.

    If using loose insulation, power up your insulation blower and aim where padding is needed. Always, carefully rinse off after applying insulation to reduce skin and lung exposure.

    And you're ready for lower energy bills through winter and summer. For more tips DIY home maintenance tips, follow our blog.

    About the Author
    Author

    The Troy Team

    Hi, I'm Troy Stevens and I'd love to assist you. Whether you're in the research phase at the beginning of your real estate search or you know exactly what you're looking for, you'll benefit from having a real estate professional by your side. I'd be honored to put my real estate experience to work for you.